20 years of cooperation between the company Benny Andersen and Leica Geosystems has built a solid customer-supplier relationship

作者：Lea Kristoffersen
Video specialists:Pamela Almeida and Line Elmelund

建筑公司本尼·安德森（Benny Andersen）使用Leica Geosystems的各种产品来确保质量结果。bob综合app下载20年的合作已经建立了基于信任和个人关系的扎实的客户支持关系。

Benny Andersen specializes in projects related to construction, sewage, and nature restoration. The company has a yearly turnover of 5 to 6 million EUR and undertakes 8 to 10 large projects as well as smaller projects like, for example, rehabilitation of lakes. Benny Andersen has cooperated with Leica Geosystems for more than 20 years and owns a portfolio of products including2D and 3D machine control solutions for excavators,dozers, hand-operatedICG60智能天线，所谓的流浪者，用于降低，旋转激光和管子激光器。他们还为一个污水处理项目租用了一个全部车站，在该项目中，GNSS信号受到限制。

Preparing for project start

A project typically starts with data preparation. The contractor delivers all project files to Benny Andersen in the form of dxf or dwg files. The files are sent to the external surveying company that Benny Andersen works with. The surveying company prepares the files and sends them out to the machines through the web-based tool for sharing and visualisation,Leica ConX.

Esbjerg的市政当局是本尼·安德森（Benny Andersen）正在从事的项目之一的承包商。这是一个以前用于火车维修的地区的公园项目。面临的挑战是对表层土壤受到污染，应将现场推出并用山丘，步行路和野花重新使用。

- We were invited to a meeting with the contractor before the project started,” explains Thomas Dam, who works as project manager for Benny Andersen. “We were consulted, and we recommended using 3D machine control for a project like this.

For a complex project like this with many details such as hills and walking paths, 3D machine control is very suitable because the 3D solution shows a pre-defined design model that contains all information mapped with the absolute geographical locations for the guidance of the machine operator. The surveying company prepared the 3D files, and there were three revisions during the project. These were synchronized with the machines through ConX. Benny Andersen has used several excavators on the project. One of the advantages is that the 3D model can be used for all machine control solutions regardless of the machine being used.

–Mikkel在CAT挖掘机上充当机器控制操作员。自2017年以来，他在公司工作了二十年，在2D和3D工作。

Seamless integration and upgrade paths are some of the advantages of working with Leica Geosystems as a total supplier

Benny Andersen is also authorized to perform sewage and drainage projects. Benny Andersen has worked on a road renovation project the city centre of Esbjerg. For this project, they used two hand-operated iCG60 smart antennas, pipe lasers, 2D machine control, and a rented total station for stake-out in between buildings where the GNSS signal was poor.
对于此道路翻新项目，2D机器控制是正确的选择。

The advantage of the Leica Geosystems license structure is that they build on each other. For excavator solutions, this means that the customer always has the 2D configuration available when they buy the 3D configuration.

对于一些项目来说,2 d机控制器l is not only enough, but it can be a more efficient solution. This is true for this road renovation project where machine control is used to grade the bottom of the sewerage and to ensure the correct slopes. The smart antenna is used for stake-out and to measure the depth and slopes as well as the depths of the pipes and the height of the property boundaries.

Carsten Jørgensen is using the iCG6o for stake-out and the measuring of slopes, covers, and boundaries between the street and the houses.

- We often use the products together, explains Thomas. We can use the same files for the excavator and for the rover.

对于公园项目，被污染的土壤标记有橙色塑料网。

This work was made by some hand men, and the excavator was placed in the other side of the site. You just turn on the rover and mark the location of the net instead of having to move the machine from the farthest corner of the site,” Thomas continues.

The Foreman solution

Benny Andersen has worked on another project for the municipality. The project was an area in front of a local train station. The projects included site preparation for benches, bushes, bike parking, water posts, and curbs.

- 托马斯解释说，工头解决方案是一个巨大的帮助，因为该项目的所有细节都在设计文件上标记。如果我们需要准备一条灯柱线，我们可以将钉子放置，测量并再次卸下钉子，这样我们到处都没有300个钉子。我们开始漫游者并进行赌注。

Using products from Leica Geosystems for as-built documentation

The cross-function between the products also comes into use for as-built documentation.

- We use the rover for as-built measurements to the contractors. They use it for their GIS registration. It is so easy to bring the rover to measure along a curb or a sand cushion. Before, we had to wait for the surveyor to come to the site for the measuring.

After 20 years of cooperation, Benny Andersen and Leica Geosystems have developed a solid customer-supplier relationship that benefits from personal relations, continuity, and product knowledge.

- We only use products from Leica Geosystems. It is nice to work with people that we know, Thomas concludes.