Learning Centre for Leica DISTO and Lino

This tutorial contains information about the use of a layer system in your measurements

测量只有一个位置的任何两个点之间的距离，还有更多...观看此45分钟的网络研讨会，以了解P2P技术如何使您的日常任务受益。

捕获复杂站点的尺寸，直接在CAD中处理数据，并将项目设计的点回到现实。在这项30分钟的网络研讨会中了解有关数字工作流程的更多信息。

The Leica Lino L6R & L6G are designed to deliver outstanding visibility, and come with many interesting features. Learn more in this 30-minute webinar.

Attend this 45-minute webinar to learn all about indirect distance measurements. We point out helpful tips and tricks which allow you to complete measurements more efficiently.

“激光线的清晰度和精度令人印象深刻 - 即使在大房间里也是如此。”曼弗雷德·塔米格（Manfred Tammeger）说，使用Lino L6G主要用于悬挂天花板和对齐干墙。

“ D810的散开确保结构是根据图纸进行的。该设备易于操作，并且由于内置摄像头而在户外工作。”普里扬卡·比斯塔（Priyanka Bista）说

Eberle & Berti have a lot of experience in this area and show how the DISTO X3 in combination with the DISTO Plan app and the Lino L2P5G simplify their life.

The challenge of installing windows especially in large project is that all windows are levelled and aligned. The Leica Lino L2P5G is the perfect tool to overcome this challenge.

Dennis Prauss said happily: “A very big benefit was when I have done the installation and I turned off the laser all the lines were gone an I had no pencil lines left on the top.”

“There is no interruption to my work because the Lino L2P5G has rechargeable batteries or can be connected to the power supply while I am working.” says Christian Gerber.

使用3D散布，可以精确捕获并从一个位置捕获预装的组件的所有细节，它们的对齐方式略有不同。

See how you can check the accuracy of your DISTO S910 for P2P measurements.

In dry wall construction, the alignment of construction elements is very time-consuming. Due to the combination of a Lino L4P1 with a DISTO D2, this effort can be reduced by 50%.

With the DISTO S910, a manhole can be measured and the data transferred to a GIS system. Photos document material and condition at the same time.

在旧建筑物中安装新元素是一个挑战，因为许多角度和依赖关系仅在空中。使用3D散布，每个细节都可以精确度量。

Get an overview of measurement technologies for state-of-the-are measurement. This document also answers important questions to select the most suitable measurement solution.

This tutorial explains the various CAD tools that are available to reduce the measurement effort.

本教程涵盖了以下主题：创建测量，确定区域和量，测量隐藏点，改变观点和扫描。

Leica Disto Plan应用程序的组织者可帮助您快速访问，组织和分享您的测量项目。

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.

通过简单地使用Leica Disto X3或X4进行顺时针或逆时针测量，使用Disto Plan应用程序创建平面图。

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed wall plans, including doors and windows.

Determine the volume of an excavation with the P2P technology of your Leica DISTO S910 or X4 and the DISTO Plan App.

查看将Leica Disto X3或X4连接到Leica Disto Plan应用程序中的Android智能手机或平板电脑的容易性。

The quick-start presents the basic functions of the Leica 3D Disto clearly with illustrations.

在这里，您会找到有关Lica Disto S910的问题的答案。

The Leica DISTO S910 and the DISTO X4 P2P package are ideal to capture corner points of a property. Together with the DISTO Plan App the outlines can be drawn directly as a plan.

详细的操作手册描述的所有功能of the Leica DISTO X3 and containing an overview of the technical data.

本教程首先提供了有关DXF数据的一些一般信息，但随后介绍了有关与Leica 3D Disto一起导入DXF数据的具体详细信息。

用Leica Disto S910和Zeno 20确定几棵树的位置。

在这里，您会找到有关莱卡3D散发问题的问题的答案。

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D2.

This tutorial describes special measuring situations that frequently occur when measuring pool covers.

快速启动显示了Leica Lino L6R的基本功能，并带有插图。

Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.

The quick-start presents the basic functions of the Leica DISTO D2 clearly with illustrations.

This tutorial describes special measuring situations that frequently occur when measuring kitchens.

There is a wide range of smart accessories for the Leica Lino series to make your daily work easier.

This tutorial shows special tools such as plumbing and comfort targeting. Comfort targeting is made for vertical walls with tilted or curved surfaces.

This tutorial describes how the Leica 3D Disto defines coordinates and axes. With this information it is a lot easier for the design work later in the CAD software.

The quick-start presents the basic functions of the Leica DISTO X3 clearly with illustrations.

This tutorial shows how the scan direction between two points can be changed.

The quick-start presents the basic functions of the Leica DISTO D510 clearly with illustrations.

This tutorial describes special measuring situations that frequently occur when measuring veranda and conservatory.

This tutorial give some advanced information which should be considered for complex situations such as multiple surfaces, tilted surfaces, curved surfaces or irregular surfaces.

本教程显示了如何在测量过程中更改Leica 3D散发器的位置，以使测量数据之后仍然匹配。

See how easy it is to connect your Leica DISTO S910 in the WiFi Mode to an iPhone or iPad within the Leica DISTO Plan App.

快速启动显示了Leica Lino L6G的基本功能，并通过插图清楚地介绍了。

Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.

The quick-start presents the basic functions of the Leica DISTO E7500i clearly with illustrations.

Simply manage and connect to your DISTO in the Leica DISTO Plan App.

See how easy it is to connect your Leica DISTO D1, D110 or D2 to a smartphone or tablet within the Leica DISTO Plan App.

The quick-start presents the basic functions of the Leica DISTO D810 clearly with illustrations.

Get an overview of all possible settings in the Leica DISTO Plan App.

在这里，您会找到有关Lica Disto X3的问题的答案。

The quick-start presents the basic functions of the Leica Lino L2P5G clearly with illustrations.

Find here an overview of the features and benefits of the Leica Lino L6R and L6G

The quick-start presents the basic functions of the Leica Lino P5 clearly with illustrations.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D810.

From a few measurements the Leica DISTO D2 automatically calculates the volume of a room / object; in addition you will get the perimeter and the total wall areas.

详细的操作手册描述的所有功能of the Leica DISTO D110 and containing an overview of the technical data.

快速启动显示了Leica Lino L2G的基本功能，并通过插图清楚地介绍了。

See how easy it is to connect your Leica DISTO D510 to a smartphone or tablet within the Leica DISTO Plan App.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D110.

The P2P-function of the DISTO S910 allows to measure distances between any 2 points. If the device is levelled, you get height differences, horizontal distances and slope angles.

With the painting function of the Leica DISTO D2 you can quickly measure all net wall areas of a room, e.g. to create a quotation or calculate the amount of paint required.

详细的操作手册描述的所有功能of the Leica DISTO E7100i and containing an overview of the technical data.

详细的操作手册描述了Leica Lino L4P1的所有功能，并包含技术数据的概述。

详细的操作手册描述的所有功能of the Leica DISTO D1 and containing an overview of the technical data.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D1.

This tutorial explains how you can project a point perpendicular to a surface.

The quick-start presents the basic functions of the Leica Lino L2P5 clearly with illustrations.

详细的操作手册描述的所有功能of the Leica Lino P5 and containing an overview of the technical data.

The quick-start presents the basic functions of the Leica DISTO D1 clearly with illustrations.

With the Smart Horizontal Mode the horizontal distance is determined using the tilt measurement, even if the object cannot be directly targeted because of an obstacle.

详细的操作手册描述了Leica Lino L2P5和L2P5G的所有功能，并包含技术数据的概述。

Leica Disto S910可以将所有测量点保存到DXF文件中，作为平面图，墙面布局甚至3D数据，以后可以将其导入到CAD软件中。

The quick-start presents the basic functions of the Leica Lino L2 clearly with illustrations.

快速启动显示了Leica Disto D110的基本功能，并在插图中清楚地介绍了。

The quick-start presents the basic functions of the Leica DISTO S910 clearly with illustrations.

本教程显示了如何测量两个点之间的高度差，参考高度以及如何定义了测量点的高度。

This tutorial shows two methods for Wall Cladding Panels. „Measure“ application for variable fixing points and “Projector” application for pre-set fixing points.

福尔克·弗洛特（FalkFlöther）喜欢为他的项目开发整个工作流程，以增加价值，从而提供一个整体，完整的工作流程，从初始现场测量到完成的计划。

详细的操作手册描述了Leica Lino L2和L2G的所有功能，并包含技术数据的概述。

详细的操作手册描述的所有功能of the Leica DISTO D2 and containing an overview of the technical data.

户外照明条件和长途limit laser visibility. The digital Pointfinder overcomes this issue and makes tricky outdoor measurements an easy task.

This tutorial shows the whole workflow building a staircase with use of the Leica 3D Disto - from measurement to design, until the installation by projecting of the fixing points.

Based on the P2P-Technology the Smart Area Function of the Leica DISTO S910 allows to easily measure areas with complex shapes.

The quick-start presents the basic functions of the Leica DISTO E7100i clearly with illustrations.

With the DISTO S910, roofs can be measured from the ground - safely, without danger and in almost any weather condition.

详细的操作手册描述了Leica Lino L6R和L6G的所有功能，并包含技术数据的概述。

The quick-start presents the basic functions of the Leica Lino L4P1 clearly with illustrations.

详细的操作手册描述了Leica Disto E7500I的所有功能，并包含技术数据的概述。

This tutorial describes special measuring situations that frequently occur when measuring ships and boats.

With the Leica 3D Disto you can quickly and easily measure rooms with complex shapes, no right angles, uneven or skewed walls or floors.

通过智能房间功能简化您的日常工作流程。通过简单地对房间进行顺时针或逆时针测量来创建平面图。

用Leica GZM3目标板和Leica 3D散发器捕获边缘，角和轮廓。

See how easy it is to connect your Leica DISTO D810 or S910 to a smartphone or tablet.

通过散发测量值创建自动缩放平面图。添加详细信息，例如墙壁开口，并在3D中查看您的模型。

快速启动显示了Leica Disto X4的基本功能，并通过插图清楚地介绍了。

This tutorial shows the most important features of the Leica 3D Disto and its standard applications - measuring, Pointfinder, saving, exporting and CAD.

See how easy it is to connect your Leica DISTO X3 or X4 to an iPhone or iPad within the Leica DISTO Plan App.

This function is suitable for complex contours. Simply define the measuring range by a start and end point, set the measuring intervals and start the scan with the Leica 3D Disto.

See how easy it is to connect your Leica DISTO S910 in the WiFi Mode to an Android smartphone or tablet within the Leica DISTO Plan App.

在不同层中组织测量值，并使用扩展的CAD工具快速绘制弧线。

详细的操作手册描述的所有功能of the Leica DISTO S910 and containing an overview of the technical data.

Tips and tricks on how to mount the Leica DISTO S910 quickly and easily on the TRI 70 tripod and FTA 360-S Adatper.

Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.

详细的操作手册描述了Leica Disto D510的所有功能，并包含技术数据的概述。

该教程使用楼梯来显示Leica 3D Disto如何通过简单地使用“投影仪函数”投影预定义的安装点来支持安装。

Leica Disto Plan应用程序的组织者可帮助您快速访问，组织和分享您的测量项目。

When measuring manually, the points are targeted and recorded individually. The Leica 3D Disto, carries out all calculations in the background and only displays the final results.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.

详细的操作手册描述的所有功能of the Leica DISTO D810 and containing an overview of the technical data.

Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.

详细的操作手册描述的所有功能of the Leica DISTO X4 and containing an overview of the technical data.

在此处找到Leica Lino P5，L2，L2G，L2P5和L2P5G的功能和优势的概述。

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed wall plans, including doors and windows.

通过简单地使用Leica Disto X3或X4进行顺时针或逆时针测量，使用Disto Plan应用程序创建平面图。

This function is used to transfer any required height from a reference point, such as the metre mark, within the whole construction site, with the Leica 3D Disto.

详细的操作手册描述了Leica 3D Disto的所有功能，并包含技术数据的概述。

在这里，您会找到经常询问有关Leica Lino Laseres的问题的答案。

Determine the volume of an excavation with the P2P technology of your Leica DISTO S910 or X4 and the DISTO Plan App.

在这里，您会找到经常询问有关Leica Disto E7100I的问题的答案。

Here you will find answers to questions that are frequently asked regarding the Leica DISTO E7500i.

在这里，您会找到有关Lica Disto D510的问题的答案。

Here you will find answers to questions that are frequently asked regarding the Leica DISTO X4.

The P2P-function of the Leica DISTO S910 allows you to measure distances between any 2 points from one position. This is very helpful when inaccessible areas are to be measured.

P2P technology allows you to measure detailed floor and wall plans, including doors and windows. Capture 3D points which then are automatically processed into 2D plans.

无论是从角，插槽还是从边缘进行测量，使用此端件，您都准备为所有测量情况准备，并自动设置测量参考。

使用Leica Disto S910和使用CAD插件的Leica Disto转移，您可以将3D测量值直接传输到现场的AutoCAD或Bricscad中。

Disto X3，X4和S910的P2P功能使您可以测量距一个位置任何2点之间的距离。在测量无法接近的区域时，这很有帮助。

如有必要，可以更换Desto D810的锂离子电池。替换电池与所需的工具一起提供。

If necessary, the Li-Ion battery of the DISTO S910 can be replaced. The replacement battery is supplied together with the required tools.

The Pointfinder allows precise aiming, even in bright sunlight, at distant objects. If the laser dot can no longer be seen, the target is clearly visible on the colour display.

The battery compartment of the DISTO D2, X3, X4 and D510 is tightly closed to ensure that no dust or dirt can get in. However, it can be easily opened to change the batteries.

The DISTO X3 and X4 combine innovative measurement technology with a site-proof design. They withstand drops from up to 2 metres and are dust and water jet protected.

P2P技术使您可以测量距一个位置任何两个点之间的距离。您还可以通过测量角点来确定任何区域。

With the DISTO D510, D810 or S910 it's easy to create a height profile. Based on a reference point, the following measurements will give you the height differences.

Start your digital construction process by exporting your plans as DXF or DWG files. Share and archive plans, attach photos as high-resolution JPGs, create PDF reports.

This tutorial explains the tool “Relocation” that allows to change the position of the 3D Disto in a measurement, if measurements cannot be done from one position.