Measure the distance between any two points from just one location, and much more... Watch this 45-minute webinar to see how the P2P-Technology can benefit your daily tasks.
Capture dimensions of complex sites, process the data directly in CAD and project designed points back to reality. Learn more about the digital workflow in this 30-minute webinar.
Attend this 45-minute webinar to learn all about indirect distance measurements. We point out helpful tips and tricks which allow you to complete measurements more efficiently.
"The clarity and precision of the laser lines is impressive - even in large rooms." says Manfred Tammeger, using the Lino L6G mainly for suspending ceilings and aligning drywalls.
“The DISTO D810 ensured that the structures were according to the drawings. The device is easy to operate and also works outdoors due to the built-in camera.” said Priyanka Bista
Eberle & Berti have a lot of experience in this area and show how the DISTO X3 in combination with the DISTO Plan app and the Lino L2P5G simplify their life.
The challenge of installing windows especially in large project is that all windows are levelled and aligned. The Leica Lino L2P5G is the perfect tool to overcome this challenge.
Dennis Prauss said happily: “A very big benefit was when I have done the installation and I turned off the laser all the lines were gone an I had no pencil lines left on the top.”
“There is no interruption to my work because the Lino L2P5G has rechargeable batteries or can be connected to the power supply while I am working.” says Christian Gerber.
With the 3D Disto, all details of the pre-installed components, which are aligned slightly differently, can be captured precisely and from one location.
In dry wall construction, the alignment of construction elements is very time-consuming. Due to the combination of a Lino L4P1 with a DISTO D2, this effort can be reduced by 50%.
Installing new elements in old buildings is a challenge, because many angles and dependencies are simply in the air. With the 3D Disto every detail can be measure precisely.
Get an overview of measurement technologies for state-of-the-are measurement. This document also answers important questions to select the most suitable measurement solution.
This tutorial covers the following topics: creating a measurement, determining areas & volumes, measuring hidden points, changing viewpoints and scans.
The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.
The Leica DISTO S910 and the DISTO X4 P2P package are ideal to capture corner points of a property. Together with the DISTO Plan App the outlines can be drawn directly as a plan.
This tutorial starts by providing some general information about DXF data, but then goes into specific detail about importing DXF data in conjunction with the Leica 3D Disto.
Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.
This tutorial give some advanced information which should be considered for complex situations such as multiple surfaces, tilted surfaces, curved surfaces or irregular surfaces.
Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.
The P2P-function of the DISTO S910 allows to measure distances between any 2 points. If the device is levelled, you get height differences, horizontal distances and slope angles.
With the Smart Horizontal Mode the horizontal distance is determined using the tilt measurement, even if the object cannot be directly targeted because of an obstacle.
The Leica DISTO S910 can save all the measured point into a dxf file, as a floor plan, wall layout or even as 3D data, which can be imported later into a CAD software.
This tutorial shows how to measure the difference in height between two points, what is meant by a reference height and how the height of a measured point is defined.
Falk Flöther likes to develop entire workflows for his projects to add value, offering an integrated, complete workflow from the initial on-site measurements to the finished plan.
This tutorial shows the most important features of the Leica 3D Disto and its standard applications - measuring, Pointfinder, saving, exporting and CAD.
This function is suitable for complex contours. Simply define the measuring range by a start and end point, set the measuring intervals and start the scan with the Leica 3D Disto.
Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.
This tutorial uses a staircase to show how the Leica 3D Disto supports installation by simply projecting the predefined mounting points using the "projector function".
When measuring manually, the points are targeted and recorded individually. The Leica 3D Disto, carries out all calculations in the background and only displays the final results.
The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.
Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.
The P2P-function of the Leica DISTO S910 allows you to measure distances between any 2 points from one position. This is very helpful when inaccessible areas are to be measured.
P2P technology allows you to measure detailed floor and wall plans, including doors and windows. Capture 3D points which then are automatically processed into 2D plans.
Whether measuring out of corners, slots or from edges, with this end-piece you are prepared for all measuring situations and the measurement reference is set automatically.
The P2P-function of the DISTO X3, X4 and S910 allows you to measure distances between any 2 points from one position. This is helpful when measuring inaccessible areas.
The battery compartment of the DISTO D2, X3, X4 and D510 is tightly closed to ensure that no dust or dirt can get in. However, it can be easily opened to change the batteries.
P2P technology allows you to measure distances between any two points from one location. You can also determine any area by measuring the corner points.
With the DISTO D510, D810 or S910 it's easy to create a height profile. Based on a reference point, the following measurements will give you the height differences.
Start your digital construction process by exporting your plans as DXF or DWG files. Share and archive plans, attach photos as high-resolution JPGs, create PDF reports.
This tutorial explains the tool “Relocation” that allows to change the position of the 3D Disto in a measurement, if measurements cannot be done from one position.