Leica Captivate - Did you know...

Leica Captivate - Did you know...

正如上一篇文章所述，Leica Captivate提供了广泛的应用程序，您可能从未听说过其中大多数应用程序！

因此，我们已经开始了一系列文章，每篇文章都引入了Leica Caintivate应用程序。如果您经常使用切除方法设置总站，那么今天的应用程序适合您 - 这确实会减少您完成切除的时间……。

自动设置应用程序

As you know, in a resection you set up your Total Station over an unknown point and measure to two or more known target points. From these measurements the instrument will then calculate the coordinates of the setup position.

To use this setup method, you need to know and do the following

• Know which targets are around the location you are working and which to use
• Know the names of these targets in the control job (the point IDs)
• 从点列表中选择每个点。
• 瞄准并衡量
• Repeat for subsequent target points

自动设置应用程序可以自动化许多此类步骤。一旦仪器在三脚架上并平整，就可以启动应用程序。首先，需要选择包含所有必需控制点的作业。

Simply enter the name of the resection point being computed (and give this point a code if you like), the instrument height and the job where the target points are stored.

进入Measure Target 1panel, the Total Station will start turning and searching for targets. Once it finds a target you can enter the target height and select the target type and then pressF1（测量）测量要点。然后，仪器将再次转动寻找下一个目标。再次，输入目标高度和目标类型，然后按F1（测量）.

Once at least three points, which the app can match to control points, have been measured, a setup result is calculated and displayed. You can now view theSetup Results，检查质量并查看3D查看器中的设置点。F1（set）will store and use this new setup. It is also possible to add more setup targets if needed.

如果所有设置目标具有相同的目标高度和目标类型，例如测量到永久安装的棱镜时，则设置甚至可以更快。在这种情况下，仪器可以自动测量所有目标。它将进行360°的转动并测量其发现的所有目标。然后，将使用选定控制作业中的控制点匹配控制点来计算新设置。

曾经是新的Setup Results存储，关闭应用程序，您可以选择任何可用的Leica Caintivate应用程序以开始工作。

该应用程序可以从Leica Myworld下载并有一个试用期，因此请在购买前随时尝试。如果您对此应用程序感兴趣，请联系您当地的Leica代表。