TPS和GNSS杆
轻型结构,高stability, robust quality
Using a professional high-quality construction pole is essential if you want to gain the accuracy needed in today’s layout applications. Due to the use of materials such as carbon and aluminium, the original poles from Leica Geosystems offer an optimal balance of weight, stability and longevity.
适合您任务的杆
Leica Geosystems为您提供大量的高价值杆子and accessoriesfor allmeasurement and layout申请。如果要达到仪器的指示准确性，则正确的杆选择是决定性的。The different pole accessories provide flexibility on site, making the use of the GNSS and total station even easier.
CRP1, CRP2 and CRP3 Standard Construction Poles
The CRP1, CRP2 and CRP3 are poles designed specifically for construction use. Offering full flexibility for either prism or GNSS use, the standard pole is available in metric (CRP1), feet fractional (CRP2) and feet decimal (CRP3) measurement units. The pole is extendable up to 2.05m with 2 x 5/8” screws to allow for the mounting of the prism at either the top or near the bottom of the pole whilst the two circular bubbles allow to use the pole upside down to quickly adjust to either layout accuracy requirements and/or site conditions.
CRP4和CRP5施工反射杆
CRP4和CRP5反射杆是作为AP20 Autopole解决方案的一部分而开发的，这是一种独特的智能系统，可通过用倾斜极启用点测量值来提高现场生产率，自动测量目标高度为2.20 m，并搜索和锁定到搜索和锁定到一个具体目标。AP20载体的机械界面确保精确的轴对齐方式可靠地倾斜补偿和稳定使用，包括当极点进入杆时upside-down use.
反射杆可以与AP20传感器一起使用，也可以用作高级无源杆（无AP20功能），提供众所周知的模拟气泡和印刷高度比例（公制或脚）。CRP4和CRP5与现有的棱镜，GNSS天线以及各种Leica GeoSystems配件，例如极夹，Bi-Pods，Bi-Pods，Prism适配器和可交换的Pole Poles尖端。
CRP10, CRP11 and CRP12 Construction Pole Tips
Leica Geosystems offers different tip options for the construction poles, offering flexibility for meeting different layout needs. The CPR10 is the standard high-quality pole tip that comes with every construction pole. The CRP11 features aflat plate with a pivot point, allowing the plate to remain flat on softer materials even when working in a sloped environment such as a stockpile or embankment. The CRP12is designed with a spring-loaded tip to easily leave an accurate mark of the laid-out point, ensuring it is then sprayed in the right place.No matter the challenge, we got you.
CRP13和CRP14构造组合杆组件
The CRP13 is a允许控制器安装到组合极配置的垫片，当精度要求高时使用。CRP14是组合配置的手柄和气泡指示器。
