压实控制应用

We are continuing our series of articles on the apps that are available for Leica Captivate.

我们在本文中介绍的应用程序可以帮助进行建筑材料压实，从而有助于防止以后生命中的结构问题。压实是施工过程的重要组成部分，该应用程序可以帮助达到每一层材料所需的正确压实水平。

压实控制应用

所有建筑物，例如道路，铁路，桥梁，建筑基础，地球固定结构，大排水管或管道都需要建立在材料实质层基础上。例如，通过铺设材料层（首先是较大的岩石，然后是较小的岩石，然后是沥青等层）来创建道路。

As each layer of material is laid, it needs to be compacted - this is normally done by large rollers or compactors.

每种材料都需要压实到指定的压实水平（通常以百分比表示）。

压实控制应用allows repeated measurements to be made to the top of the material as it is compacted by the roller.

启动应用程序时，可以创建一个新层。这意味着在新材料层的顶部进行了一组测量。应测量几个点，均匀分布在层的表面上。

Once enough points are measured, pressF5（完成）。现在，滚子/压实机器在第一轮压实方面穿过层。之后测量第二个“级别”，这意味着再次测量相同的点。

使用无反射测量时，可以通过使用赌注点自动function from the工具menu of the app (UseFN+F6（工具））。使用此功能时，该应用将在表面上自动找到与第一级测量的相同点。

Once the second level of points has been measured, a message is displayed, showing the percentage of first level points that have been measured on the second level (100% means all level 1 points were measured also on level 2) and the average height difference between the measured points on level 1 and level 2.

The设置该应用的面板允许定义材料足够压实的压实比。默认值为10％。

To calculate the compaction ratio, the app references the height difference between level 1 and level 2 as 100%. It then compares the height differences of the subsequently measured levels to this reference height difference.

一旦两个测得的水平之间的高度差（含义在滚动/压实机的一轮之后遍布整个层之后）就小于定义Limit in ratio(e.g. 10%) of the first height difference, the app will mark all points as green and inform the user that the material has been sufficiently rolled and the compaction specification has been achieved.

Afterwards theCompaction Resultsare displayed.

A stylesheet can be used to create a comprehensive report of the compaction measurements.

如果物质层不够压实，这可能会导致生活后期的问题。另外，如果这些层过度压缩，则浪费了钱。该应用程序可以帮助防止这两个问题。

This app can be downloaded from Leica myWorld and has a trial period, so please feel free to try it before buying. If you are interested in this app, please contact your local Leica representative.