Leica Nova MS60 Dynamic Lock

With the release of Leica Captivate 2.00, Dynamic Lock has been introduced for the Leica Nova MS60 MultiStation. The new functionality has greatly improved the ability of the #MS60 to lock (detect and then follow) onto a moving prism. Feedback so far from users is absolutely fantastic!

In this blog, Hans-Martin Zogg, TPS Business Director, will explain in detail how the Dynamic Lock works and what the applications are about.

Until now, every surveyor or construction machine had to stand and wait for the total station to lock (detect and then follow) onto a target, except when the target was already in the telescope’s field-of-view. Although this takes only a few seconds, over the course of a measuring day, the amount of time and money lost can add up significantly.

MS60多稳态上的动态锁定功能改变了这一点。用户不再需要站立并等待 - 即使目标仍在移动，多稳定将锁定到目标上。

这非常适合高度动态的应用，例如：

1）机器控制

2）将杆子经常放在地面上的位置

3) And basically in any busy Environment

对于技术上的意识，这是关于其工作原理的快速解释。到目前为止，只有当棱镜进入望远镜的视野时，MS60才检测到并锁定在移动的棱镜上。望远镜的视图当然很狭窄 - 约1.5°。有了新的动态锁，视野已扩大到+/- 20°的垂直激光扇。因此，将检测到任何跨越该垂直风扇的目标。

The best way to really experience the Dynamic Lock is to try it yourself – you won’t believe how good it is and how much time you will save until you try it!

要详细了解其工作方式的更多信息，请观看How-To视频：

Best regards,