从编码到Stakeout - 9种新的方法，Leica Caintivate v3.0可以提高效率

与所有事物一样 - 时间就是金钱，也是在测量和建筑世界中Leica Captivatev3.0将有助于加快工作流程并提高效率。

1）一种更有效的处理控制数据的方法

这些多个更改在上一篇文章中描述了Leica Captivate v3.0详情,请阅读它。Leica Captivate v3.0allows linking several jobs containing control and design data to one working job. This way, all Setup, Stakeout and Alignment data used with a working job is automatically activated when selecting the job in the home panel. It also allows using control data from more than one job in parallel and hiding jobs from the home panel to keep it tidy and only show what is needed at the time.

控制和设计工作可以链接到工作工作。

在新的工作管理小组中，可以将工作设置为
可见/看不见的家庭面板。

2) Faster Coding and linework

测量应用程序中的编码和线条功能是最常用的功能之一，我们进行了几次更改以使其更快。

Firstly, we have added a hotkey to access the Load Code Template panel. This allows easily changing the sequence of codes when switching between cross sections.

Further, we have added five new hotkeys that allow switching a highlighted code box between being a linework code and a non-linework code with just one button press. It also allows starting new lines quickly. For instance, if measuring a tree and then wanting to start a line of trees, press the new hotkeyUser - Begin line并且代码已更改以启动树线。

新的Hotkeys快速在线路和非线工作之间切换编码

第三个更改是一个很小的改进，但将对使用属性值的每个人有所作为。选择属性值时，按“ Enter”按钮将关闭选择列表，但不会将焦点移至下一个字段。现在，这与新版本一起使用，使属性值的输入变得更加顺畅。

最后但并非最不重要,multi-coding的变化which may be most useful when surveying cables, pipelines or similar objects – it is now possible to permanently keep multi-coding on. This allows subsequent measurements of multiple points with the same coordinate but different codes. Permanent multi-coding might be useful when, for example, several cables or pipelines join and need measuring simultaneously.

加入管道要测量


多编码可以测量加入的管道

除此之外，当多编码永久打开时，我们已经禁用了代码框的重新分类，从而使点存储更快。

3) Easily create Stakeout reports

Surveyors might need to quickly and easily provide reports about the points which were staked . This information may be needed in various formats and with varying content from the same job. While the job can contain a mixture of data (measured, control, staked), only the stakeout data is relevant for such a report.

Leica Captivate v3.0now supports the export of user configured cutsheet data directly from within the Stake points app. The needed data can be provided in the required format and content directly from the field without the need of office software or further editing of the files.

可以定义和存储切割表内容以供以后使用。


Microsoft Excel中显示的cutsheet内容

4) Accessing functions faster

在任何软件中工作时，每个按钮都需要时间。因此，按下按钮越少，节省的时间就越多。因此，我们添加了新的热键，以更快地访问经常使用的功能。

新的热键允许以下内容：

• Choose the nearest point when staking points with a GS sensor. This function was until now available in the tools menu and is now a hotkey for faster access.
• 在应用程序中工作时，访问灯和配件设置以轻松打开或关闭激光指针
• 访问ID模板面板以轻松更改点编号规则（例如，每个要测量的新横截面）

5）更轻松的仪器配置

我们已经对通用仪器配置进行了2个更改。

第一个更改是传输用户对象tool which now allows excluding the jobs when transferring the settings from one instrument to another. Up until now, jobs had always been included, which made it necessary to delete them on the new instrument. Now the settings can easily be transferred to new instruments without the need of removing jobs afterwards.

第二个更改是整个系统中的一般更改 - 到处都可以输入密码，现在有一个复选框允许以纯文本显示密码。这使得复杂密码的输入较小，易于使用，例如，这可以使SmartNet登录更加容易。

密码显示为清晰文本

6) More point information

Leica Captivate允许在应用程序中输入的测量点和多个高程的偏移。但是，一旦积分存储，这些值就无法再更改。有了新的Leica Caintivate版本，每个点输入的偏移和多个高度显示在Data Management并且，如果需要，可以在将它们带入办公室之前进行编辑和更新。

对于固定点，现在在每个点的数据管理中还显示了赌注应用程序中显示的利益结果，允许以后再用。例如，如果钉在建筑工地上并需要重新定位并重新标记，则可以帮助您有所帮助。

Showing the Stake results in the Edit Point panel

7）节省设置

有两个更改可以帮助节省设置的时间。第一个可以减少进行调查所需的总站设置的数量，第二个可能会加快Orientate to line设置方法。

在开始调查工作时，测量师将评估要进行调查的区域，然后决定设置总站的最佳位置 - 通常试图最大程度地减少设置数量。在测量时，测量师可能会意识到额外的点需要测量，并且需要额外的设置，有时只有很少的积分。为了节省其他设置，Measure Hidden Point现在在CS20上也可以在TS模式下使用功能。它允许使用CS20内部散布来测量与总站隐藏的点的距离，然后计算这些点的坐标。这可以节省必须进行额外的设置，并可以大大减少调查工作所需的时间。

Inside the new Measure Hidden Point app for TS mode

为了节省设置仪器的时间，我们已经扩展了Orientate to line设置方法。现在可以选择一个现有点来定义该行的定向，而不必在点坐标中输入。此外，到定向的线现在可以定义任何方位角，而不是固定在北轴或速度轴上。这使得Orientate to line方法更灵活，可以满足更多的设置要求。

8）提高道路应用程序的熟练程度

When staking a Road alignment, there may be single points in the blueprint (design) that do not belong to the alignment. For instance, if there is a fire hydrant in the blueprint with a location given by a chainage and offset, it will be useful to be able to stake that single point while working on the road and without leaving the app. So we have extended the COGO Tool within the Road app with new methods that allow creating points with chainage and offset information.

3 new methods available in the COGO Roads tool


沿对齐方式创建的新点以相等的链条增量，
距离和高度偏移

It is now not necessary anymore to calculate coordinates for these points or to leave the Roads app to enter and use them in Leica Captivate.

Further, Leica Captivate v3.0 now shows the length of an alignment as meta data when selecting an alignment. Easy access to alignment length information can be beneficial, for instance if the client wants to know how many lineal meters or feet there are in total for a particular section.

9）处理CAD数据时提高速度

对于非常大的CAD文件，Leica Captivate在3D查看器中显示它们时会偶尔会遇到性能问题。对于Leica Caintivate v3.0，我们大大提高了显示CAD数据的性能，因此3D Viewer现在能够平稳处理大型CAD文件。

就是这样 - 我们的9次进步以加快Leica着迷的工作流程。最终的改进是可以选择将DTM视为3D表面的能力。这不是为了提高效率，而是为了更好的可见性。看看下面的屏幕截图。

DTM显示为3D表面

如何获得新版本？

If you want to download the new Leica Captivate v3.0 field software, it will be available on Leica myWorld after Dec 1st 2017. For the installation you will need a Customer Care Package (CCP) license valid until at least December 1st 2017. If you have any particular questions or wishes, please contact your localLeica Geosystems代表。