Learning Centre for Leica DISTO and Lino

This tutorial contains information about the use of a layer system in your measurements

Measure the distance between any two points from just one location, and much more... Watch this 45-minute webinar to see how the P2P-Technology can benefit your daily tasks.

捕捉尺寸复杂的网站,处理data directly in CAD and project designed points back to reality. Learn more about the digital workflow in this 30-minute webinar.

The Leica Lino L6R & L6G are designed to deliver outstanding visibility, and come with many interesting features. Learn more in this 30-minute webinar.

Attend this 45-minute webinar to learn all about indirect distance measurements. We point out helpful tips and tricks which allow you to complete measurements more efficiently.

"The clarity and precision of the laser lines is impressive - even in large rooms." says Manfred Tammeger, using the Lino L6G mainly for suspending ceilings and aligning drywalls.

“The DISTO D810 ensured that the structures were according to the drawings. The device is easy to operate and also works outdoors due to the built-in camera.” said Priyanka Bista

Eberle & Berti have a lot of experience in this area and show how the DISTO X3 in combination with the DISTO Plan app and the Lino L2P5G simplify their life.

在大型项目中，尤其是在大型项目中安装窗口的挑战是所有窗口均已平整和对齐。Leica Lino L2P5G是克服这一挑战的理想工具。

Dennis Prauss said happily: “A very big benefit was when I have done the installation and I turned off the laser all the lines were gone an I had no pencil lines left on the top.”

“There is no interruption to my work because the Lino L2P5G has rechargeable batteries or can be connected to the power supply while I am working.” says Christian Gerber.

With the 3D Disto, all details of the pre-installed components, which are aligned slightly differently, can be captured precisely and from one location.

See how you can check the accuracy of your DISTO S910 for P2P measurements.

In dry wall construction, the alignment of construction elements is very time-consuming. Due to the combination of a Lino L4P1 with a DISTO D2, this effort can be reduced by 50%.

使用Disto S910，可以测量人孔，并将数据传输到GIS系统。照片同时记录材料和状况。

Installing new elements in old buildings is a challenge, because many angles and dependencies are simply in the air. With the 3D Disto every detail can be measure precisely.

Get an overview of measurement technologies for state-of-the-are measurement. This document also answers important questions to select the most suitable measurement solution.

This tutorial explains the various CAD tools that are available to reduce the measurement effort.

This tutorial covers the following topics: creating a measurement, determining areas & volumes, measuring hidden points, changing viewpoints and scans.

The Organiser of the Leica DISTO Plan App helps you to quickly access, organise and share your measurement projects.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.

Create floorplans with the DISTO Plan App by simply taking clockwise or counter-clockwise measurements of a room with your Leica DISTO X3 or X4.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed wall plans, including doors and windows.

Determine the volume of an excavation with the P2P technology of your Leica DISTO S910 or X4 and the DISTO Plan App.

See how easy it is to connect your Leica DISTO X3 or X4 to an Android smartphone or tablet within the Leica DISTO Plan App.

The quick-start presents the basic functions of the Leica 3D Disto clearly with illustrations.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO S910.

The Leica DISTO S910 and the DISTO X4 P2P package are ideal to capture corner points of a property. Together with the DISTO Plan App the outlines can be drawn directly as a plan.

详细的操作手册描述了Leica Disto X3的所有功能，并包含技术数据的概述。

This tutorial starts by providing some general information about DXF data, but then goes into specific detail about importing DXF data in conjunction with the Leica 3D Disto.

Determine the position of a couple of trees with Leica DISTO S910 and Zeno 20.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica 3D Disto.

在这里，您会找到经常询问有关Leica Disto D2的问题的答案。

This tutorial describes special measuring situations that frequently occur when measuring pool covers.

The quick-start presents the basic functions of the Leica Lino L6R clearly with illustrations.

Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.

The quick-start presents the basic functions of the Leica DISTO D2 clearly with illustrations.

This tutorial describes special measuring situations that frequently occur when measuring kitchens.

There is a wide range of smart accessories for the Leica Lino series to make your daily work easier.

This tutorial shows special tools such as plumbing and comfort targeting. Comfort targeting is made for vertical walls with tilted or curved surfaces.

This tutorial describes how the Leica 3D Disto defines coordinates and axes. With this information it is a lot easier for the design work later in the CAD software.

快速启动显示了Leica Disto X3的基本功能，并在插图中清楚地介绍了。

This tutorial shows how the scan direction between two points can be changed.

The quick-start presents the basic functions of the Leica DISTO D510 clearly with illustrations.

This tutorial describes special measuring situations that frequently occur when measuring veranda and conservatory.

本教程提供了一些高级信息，这些信息应在复杂的情况下考虑，例如多个表面，倾斜表面，弯曲表面或不规则表面。

This tutorial shows how the position of the Leica 3D Disto can be changed during a measurement so that the measurement data still match afterwards.

查看在WiFi模式下将Leica Disto S910连接到Leica Disto Plan应用程序中的iPhone或iPad有多容易。

Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.

The quick-start presents the basic functions of the Leica Lino L6G clearly with illustrations.

The quick-start presents the basic functions of the Leica DISTO E7500i clearly with illustrations.

只需在Leica Disto Plan应用程序中管理并连接到您的散发设备即可。

See how easy it is to connect your Leica DISTO D1, D110 or D2 to a smartphone or tablet within the Leica DISTO Plan App.

The quick-start presents the basic functions of the Leica DISTO D810 clearly with illustrations.

概述Leica Disto Plan应用程序中的所有可能设置。

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO X3.

The quick-start presents the basic functions of the Leica Lino L2P5G clearly with illustrations.

在这里概述Leica Lino L6R和L6G的功能和好处

The quick-start presents the basic functions of the Leica Lino P5 clearly with illustrations.

From a few measurements the Leica DISTO D2 automatically calculates the volume of a room / object; in addition you will get the perimeter and the total wall areas.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO D810.

Detailed operating manual describing all functions of the Leica DISTO D110 and containing an overview of the technical data.

查看将Leica Disto D510连接到Leica Disto Plan应用程序中的智能手机或平板电脑的容易。

The quick-start presents the basic functions of the Leica Lino L2G clearly with illustrations.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO D110.

Disto S910的P2P功能允许测量任何2分之间的距离。如果设备平整，则会获得高度差异，水平距离和斜率角度。

With the painting function of the Leica DISTO D2 you can quickly measure all net wall areas of a room, e.g. to create a quotation or calculate the amount of paint required.

Detailed operating manual describing all functions of the Leica DISTO E7100i and containing an overview of the technical data.

Detailed operating manual describing all functions of the Leica Lino L4P1 and containing an overview of the technical data.

Detailed operating manual describing all functions of the Leica DISTO D1 and containing an overview of the technical data.

在这里，您会发现经常询问有关Leica Disto D1的问题的答案。

This tutorial explains how you can project a point perpendicular to a surface.

快速启动显示了Leica Lino L2P5的基本功能，并带有插图。

Detailed operating manual describing all functions of the Leica Lino P5 and containing an overview of the technical data.

The quick-start presents the basic functions of the Leica DISTO D1 clearly with illustrations.

使用智能水平模式，即使由于障碍物而无法直接靶向对象，水平距离也可以确定水平距离。

Detailed operating manual describing all functions of the Leica Lino L2P5 and L2P5G and containing an overview of the technical data.

The Leica DISTO S910 can save all the measured point into a dxf file, as a floor plan, wall layout or even as 3D data, which can be imported later into a CAD software.

The quick-start presents the basic functions of the Leica Lino L2 clearly with illustrations.

The quick-start presents the basic functions of the Leica DISTO D110 clearly with illustrations.

The quick-start presents the basic functions of the Leica DISTO S910 clearly with illustrations.

This tutorial shows how to measure the difference in height between two points, what is meant by a reference height and how the height of a measured point is defined.

Falk Flöther likes to develop entire workflows for his projects to add value, offering an integrated, complete workflow from the initial on-site measurements to the finished plan.

This tutorial shows two methods for Wall Cladding Panels. „Measure“ application for variable fixing points and “Projector” application for pre-set fixing points.

Detailed operating manual describing all functions of the Leica Lino L2 and L2G and containing an overview of the technical data.

Detailed operating manual describing all functions of the Leica DISTO D2 and containing an overview of the technical data.

Outdoor lighting conditions and long distances can limit laser visibility. The digital Pointfinder overcomes this issue and makes tricky outdoor measurements an easy task.

This tutorial shows the whole workflow building a staircase with use of the Leica 3D Disto - from measurement to design, until the installation by projecting of the fixing points.

Based on the P2P-Technology the Smart Area Function of the Leica DISTO S910 allows to easily measure areas with complex shapes.

The quick-start presents the basic functions of the Leica DISTO E7100i clearly with illustrations.

With the DISTO S910, roofs can be measured from the ground - safely, without danger and in almost any weather condition.

Detailed operating manual describing all functions of the Leica Lino L6R and L6G and containing an overview of the technical data.

Detailed operating manual describing all functions of the Leica DISTO E7500i and containing an overview of the technical data.

The quick-start presents the basic functions of the Leica Lino L4P1 clearly with illustrations.

This tutorial describes special measuring situations that frequently occur when measuring ships and boats.

Detailed operating manual describing all functions of the Leica DISTO S910 and containing an overview of the technical data.

With the Leica 3D Disto you can quickly and easily measure rooms with complex shapes, no right angles, uneven or skewed walls or floors.

Simplify your daily workflow with the Smart Room function. Create floorplans by simply taking clockwise or counter-clockwise measurements of a room.

Capture edges, corners and contours with the Leica GZM3 target plate and the Leica 3D Disto.

See how easy it is to connect your Leica DISTO D810 or S910 to a smartphone or tablet.

Create automatically scaled floorplans with your DISTO measurements. Add details, such as wall openings and view your model in 3D.

The quick-start presents the basic functions of the Leica DISTO X4 clearly with illustrations.

This tutorial shows the most important features of the Leica 3D Disto and its standard applications - measuring, Pointfinder, saving, exporting and CAD.

See how easy it is to connect your Leica DISTO X3 or X4 to an iPhone or iPad within the Leica DISTO Plan App.

This function is suitable for complex contours. Simply define the measuring range by a start and end point, set the measuring intervals and start the scan with the Leica 3D Disto.

查看在WiFi模式下将Leica Disto S910连接到Leica Disto Plan应用程序中的Android智能手机或平板电脑的容易。

Organise your measurements in different layers and use the extended CAD tools to quickly draw arcs.

Tips and tricks on how to mount the Leica DISTO S910 quickly and easily on the TRI 70 tripod and FTA 360-S Adatper.

Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.

Detailed operating manual describing all functions of the Leica DISTO D510 and containing an overview of the technical data.

This tutorial uses a staircase to show how the Leica 3D Disto supports installation by simply projecting the predefined mounting points using the "projector function".

The Organiser of the Leica DISTO Plan App helps you to quickly access, organise and share your measurement projects.

当手动测量,点是有针对性的nd recorded individually. The Leica 3D Disto, carries out all calculations in the background and only displays the final results.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.

Detailed operating manual describing all functions of the Leica DISTO D810 and containing an overview of the technical data.

Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.

Create floorplans with the DISTO Plan App by simply taking clockwise or counter-clockwise measurements of a room with your Leica DISTO X3 or X4.

Detailed operating manual describing all functions of the Leica DISTO X4 and containing an overview of the technical data.

Find here an overview of the features and benefits of the Leica Lino P5, L2, L2G, L2P5 and L2P5G.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed wall plans, including doors and windows.

Detailed operating manual describing all functions of the Leica 3D Disto and containing an overview of the technical data.

This function is used to transfer any required height from a reference point, such as the metre mark, within the whole construction site, with the Leica 3D Disto.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica Lino laseres.

Determine the volume of an excavation with the P2P technology of your Leica DISTO S910 or X4 and the DISTO Plan App.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO E7100i.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO E7500i.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO X4.

在这里你会找到方法rs to questions that are frequently asked regarding the Leica DISTO D510.

The P2P-function of the Leica DISTO S910 allows you to measure distances between any 2 points from one position. This is very helpful when inaccessible areas are to be measured.

P2P technology allows you to measure detailed floor and wall plans, including doors and windows. Capture 3D points which then are automatically processed into 2D plans.

Whether measuring out of corners, slots or from edges, with this end-piece you are prepared for all measuring situations and the measurement reference is set automatically.

With the Leica DISTO S910 and Leica DISTO Transfer with CAD Plugin you can directly transfer the 3D measurements into AutoCAD or BricsCAD on site.

The P2P-function of the DISTO X3, X4 and S910 allows you to measure distances between any 2 points from one position. This is helpful when measuring inaccessible areas.

If necessary, the Li-Ion battery of the DISTO D810 can be replaced. The replacement battery is supplied together with the required tools.

If necessary, the Li-Ion battery of the DISTO S910 can be replaced. The replacement battery is supplied together with the required tools.

The Pointfinder allows precise aiming, even in bright sunlight, at distant objects. If the laser dot can no longer be seen, the target is clearly visible on the colour display.

The battery compartment of the DISTO D2, X3, X4 and D510 is tightly closed to ensure that no dust or dirt can get in. However, it can be easily opened to change the batteries.

The DISTO X3 and X4 combine innovative measurement technology with a site-proof design. They withstand drops from up to 2 metres and are dust and water jet protected.

P2P technology allows you to measure distances between any two points from one location. You can also determine any area by measuring the corner points.

With the DISTO D510, D810 or S910 it's easy to create a height profile. Based on a reference point, the following measurements will give you the height differences.

Start your digital construction process by exporting your plans as DXF or DWG files. Share and archive plans, attach photos as high-resolution JPGs, create PDF reports.

本教程解释了工具“搬迁”，该工具允许在测量中更改3D散发位置，如果无法从一个位置进行测量。