学习中心for Leica DISTO and Lino

This tutorial contains information about the use of a layer system in your measurements

Measure the distance between any two points from just one location, and much more... Watch this 45-minute webinar to see how the P2P-Technology can benefit your daily tasks.

Capture dimensions of complex sites, process the data directly in CAD and project designed points back to reality. Learn more about the digital workflow in this 30-minute webinar.

Leica Lino L6R＆L6G旨在提供出色的可见性，并具有许多有趣的功能。在这个30分钟的网络研讨会中了解更多信息。

Attend this 45-minute webinar to learn all about indirect distance measurements. We point out helpful tips and tricks which allow you to complete measurements more efficiently.

"The clarity and precision of the laser lines is impressive - even in large rooms." says Manfred Tammeger, using the Lino L6G mainly for suspending ceilings and aligning drywalls.

“The DISTO D810 ensured that the structures were according to the drawings. The device is easy to operate and also works outdoors due to the built-in camera.” said Priyanka Bista

Eberle & Berti have a lot of experience in this area and show how the DISTO X3 in combination with the DISTO Plan app and the Lino L2P5G simplify their life.

The challenge of installing windows especially in large project is that all windows are levelled and aligned. The Leica Lino L2P5G is the perfect tool to overcome this challenge.

Dennis Prauss said happily: “A very big benefit was when I have done the installation and I turned off the laser all the lines were gone an I had no pencil lines left on the top.”

“There is no interruption to my work because the Lino L2P5G has rechargeable batteries or can be connected to the power supply while I am working.” says Christian Gerber.

With the 3D Disto, all details of the pre-installed components, which are aligned slightly differently, can be captured precisely and from one location.

See how you can check the accuracy of your DISTO S910 for P2P measurements.

In dry wall construction, the alignment of construction elements is very time-consuming. Due to the combination of a Lino L4P1 with a DISTO D2, this effort can be reduced by 50%.

With the DISTO S910, a manhole can be measured and the data transferred to a GIS system. Photos document material and condition at the same time.

Installing new elements in old buildings is a challenge, because many angles and dependencies are simply in the air. With the 3D Disto every detail can be measure precisely.

Get an overview of measurement technologies for state-of-the-are measurement. This document also answers important questions to select the most suitable measurement solution.

本教程解释了可用于减少测量工作的各种CAD工具。

This tutorial covers the following topics: creating a measurement, determining areas & volumes, measuring hidden points, changing viewpoints and scans.

The Organiser of the Leica DISTO Plan App helps you to quickly access, organise and share your measurement projects.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.

Create floorplans with the DISTO Plan App by simply taking clockwise or counter-clockwise measurements of a room with your Leica DISTO X3 or X4.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed wall plans, including doors and windows.

Determine the volume of an excavation with the P2P technology of your Leica DISTO S910 or X4 and the DISTO Plan App.

See how easy it is to connect your Leica DISTO X3 or X4 to an Android smartphone or tablet within the Leica DISTO Plan App.

The quick-start presents the basic functions of the Leica 3D Disto clearly with illustrations.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO S910.

The Leica DISTO S910 and the DISTO X4 P2P package are ideal to capture corner points of a property. Together with the DISTO Plan App the outlines can be drawn directly as a plan.

Detailed operating manual describing all functions of the Leica DISTO X3 and containing an overview of the technical data.

This tutorial starts by providing some general information about DXF data, but then goes into specific detail about importing DXF data in conjunction with the Leica 3D Disto.

Determine the position of a couple of trees with Leica DISTO S910 and Zeno 20.

Here you will find answers to questions that are frequently asked regarding the Leica 3D Disto.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D2.

This tutorial describes special measuring situations that frequently occur when measuring pool covers.

The quick-start presents the basic functions of the Leica Lino L6R clearly with illustrations.

Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.

The quick-start presents the basic functions of the Leica DISTO D2 clearly with illustrations.

本教程描述了测量厨房时经常发生的特殊测量情况。

There is a wide range of smart accessories for the Leica Lino series to make your daily work easier.

This tutorial shows special tools such as plumbing and comfort targeting. Comfort targeting is made for vertical walls with tilted or curved surfaces.

本教程描述了狮子3D散发方式如何定义坐标和轴。有了这些信息，对于以后的CAD软件，设计工作要容易得多。

The quick-start presents the basic functions of the Leica DISTO X3 clearly with illustrations.

本教程显示了如何更改两个点之间的扫描方向。

The quick-start presents the basic functions of the Leica DISTO D510 clearly with illustrations.

This tutorial describes special measuring situations that frequently occur when measuring veranda and conservatory.

This tutorial give some advanced information which should be considered for complex situations such as multiple surfaces, tilted surfaces, curved surfaces or irregular surfaces.

本教程展示了徕卡的位置3D Disto can be changed during a measurement so that the measurement data still match afterwards.

See how easy it is to connect your Leica DISTO S910 in the WiFi Mode to an iPhone or iPad within the Leica DISTO Plan App.

Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.

The quick-start presents the basic functions of the Leica Lino L6G clearly with illustrations.

快速启动显示了Leica Disto E7500I的基本功能，并带有插图。

Simply manage and connect to your DISTO in the Leica DISTO Plan App.

See how easy it is to connect your Leica DISTO D1, D110 or D2 to a smartphone or tablet within the Leica DISTO Plan App.

The quick-start presents the basic functions of the Leica DISTO D810 clearly with illustrations.

Get an overview of all possible settings in the Leica DISTO Plan App.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO X3.

The quick-start presents the basic functions of the Leica Lino L2P5G clearly with illustrations.

Find here an overview of the features and benefits of the Leica Lino L6R and L6G

The quick-start presents the basic functions of the Leica Lino P5 clearly with illustrations.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D810.

从几个测量值中，Leica Disto D2自动计算房间 /对象的体积；此外，您将获得周长和总墙壁区域。

详细的操作手册描述了Leica Disto D110的所有功能，并包含技术数据的概述。

The quick-start presents the basic functions of the Leica Lino L2G clearly with illustrations.

See how easy it is to connect your Leica DISTO D510 to a smartphone or tablet within the Leica DISTO Plan App.

在这里，您会找到有关Lica Disto D110的问题的答案。

The P2P-function of the DISTO S910 allows to measure distances between any 2 points. If the device is levelled, you get height differences, horizontal distances and slope angles.

Detailed operating manual describing all functions of the Leica DISTO E7100i and containing an overview of the technical data.

借助Leica Disto D2的绘画功能，您可以快速测量房间的所有净墙壁区域，例如创建报价或计算所需的油漆量。

Detailed operating manual describing all functions of the Leica Lino L4P1 and containing an overview of the technical data.

Detailed operating manual describing all functions of the Leica DISTO D1 and containing an overview of the technical data.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D1.

This tutorial explains how you can project a point perpendicular to a surface.

The quick-start presents the basic functions of the Leica Lino L2P5 clearly with illustrations.

详细的操作手册描述了Leica Lino P5的所有功能，并包含技术数据的概述。

The quick-start presents the basic functions of the Leica DISTO D1 clearly with illustrations.

与智能水平模式的水平距离ance is determined using the tilt measurement, even if the object cannot be directly targeted because of an obstacle.

Detailed operating manual describing all functions of the Leica Lino L2P5 and L2P5G and containing an overview of the technical data.

The Leica DISTO S910 can save all the measured point into a dxf file, as a floor plan, wall layout or even as 3D data, which can be imported later into a CAD software.

The quick-start presents the basic functions of the Leica Lino L2 clearly with illustrations.

The quick-start presents the basic functions of the Leica DISTO D110 clearly with illustrations.

快速启动显示了Leica Disto S910的基本功能，并通过插图清楚地介绍了。

This tutorial shows how to measure the difference in height between two points, what is meant by a reference height and how the height of a measured point is defined.

该教程显示了两种用于壁板面板的方法。“测量”可变固定点的应用程序和预设固定点的“投影仪”应用。

Falk Flöther likes to develop entire workflows for his projects to add value, offering an integrated, complete workflow from the initial on-site measurements to the finished plan.

Detailed operating manual describing all functions of the Leica Lino L2 and L2G and containing an overview of the technical data.

详细的操作手册描述了Leica Disto D2的所有功能，并包含技术数据的概述。

Outdoor lighting conditions and long distances can limit laser visibility. The digital Pointfinder overcomes this issue and makes tricky outdoor measurements an easy task.

本教程展示了整个工作流程建立staircase with use of the Leica 3D Disto - from measurement to design, until the installation by projecting of the fixing points.

基于p2p技术的智能区域功能n of the Leica DISTO S910 allows to easily measure areas with complex shapes.

The quick-start presents the basic functions of the Leica DISTO E7100i clearly with illustrations.

With the DISTO S910, roofs can be measured from the ground - safely, without danger and in almost any weather condition.

Detailed operating manual describing all functions of the Leica Lino L6R and L6G and containing an overview of the technical data.

The quick-start presents the basic functions of the Leica Lino L4P1 clearly with illustrations.

Detailed operating manual describing all functions of the Leica DISTO E7500i and containing an overview of the technical data.

本教程描述了测量船只和船时经常发生的特殊测量情况。

With the Leica 3D Disto you can quickly and easily measure rooms with complex shapes, no right angles, uneven or skewed walls or floors.

Simplify your daily workflow with the Smart Room function. Create floorplans by simply taking clockwise or counter-clockwise measurements of a room.

Capture edges, corners and contours with the Leica GZM3 target plate and the Leica 3D Disto.

See how easy it is to connect your Leica DISTO D810 or S910 to a smartphone or tablet.

Create automatically scaled floorplans with your DISTO measurements. Add details, such as wall openings and view your model in 3D.

The quick-start presents the basic functions of the Leica DISTO X4 clearly with illustrations.

This tutorial shows the most important features of the Leica 3D Disto and its standard applications - measuring, Pointfinder, saving, exporting and CAD.

查看将Leica Disto X3或X4连接到Leica Disto Plan应用程序中的iPhone或iPad有多容易。

This function is suitable for complex contours. Simply define the measuring range by a start and end point, set the measuring intervals and start the scan with the Leica 3D Disto.

See how easy it is to connect your Leica DISTO S910 in the WiFi Mode to an Android smartphone or tablet within the Leica DISTO Plan App.

Organise your measurements in different layers and use the extended CAD tools to quickly draw arcs.

详细的操作手册描述了Leica Disto S910的所有功能，并包含技术数据的概述。

有关如何快速轻松地将Leica Disto S910安装在TRI 70三脚架和FTA 360-S ADATPER上的技巧和技巧。

Create automatically scaled floorplans from your DISTO measurements with the Leica DISTO Plan App. Add details, such as wall openings and view your model in 3D.

Detailed operating manual describing all functions of the Leica DISTO D510 and containing an overview of the technical data.

This tutorial uses a staircase to show how the Leica 3D Disto supports installation by simply projecting the predefined mounting points using the "projector function".

The Organiser of the Leica DISTO Plan App helps you to quickly access, organise and share your measurement projects.

When measuring manually, the points are targeted and recorded individually. The Leica 3D Disto, carries out all calculations in the background and only displays the final results.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed floor plans. Capture 3D points which then are automatically processed into 2D plans.

Detailed operating manual describing all functions of the Leica DISTO D810 and containing an overview of the technical data.

Take a picture with your tablet or smartphone using the Leica DISTO Plan App and assign distance measurements from your Leica DISTO to the corresponding part of the image.

Detailed operating manual describing all functions of the Leica DISTO X4 and containing an overview of the technical data.

Find here an overview of the features and benefits of the Leica Lino P5, L2, L2G, L2P5 and L2P5G.

The combination of the P2P Technology and the DISTO Plan App allows to measure detailed wall plans, including doors and windows.

Create floorplans with the DISTO Plan App by simply taking clockwise or counter-clockwise measurements of a room with your Leica DISTO X3 or X4.

该功能用于将任何所需的高度从参考点（例如仪表标记）转移到整个施工站点内的仪表标记，并带有Leica 3D散布。

Detailed operating manual describing all functions of the Leica 3D Disto and containing an overview of the technical data.

Here you will find answers to questions that are frequently asked regarding the Leica Lino laseres.

Determine the volume of an excavation with the P2P technology of your Leica DISTO S910 or X4 and the DISTO Plan App.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO E7100i.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO E7500i.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO D510.

Here you will find answers to questions that are frequently asked regarding the Leica DISTO X4.

The P2P-function of the Leica DISTO S910 allows you to measure distances between any 2 points from one position. This is very helpful when inaccessible areas are to be measured.

P2P technology allows you to measure detailed floor and wall plans, including doors and windows. Capture 3D points which then are automatically processed into 2D plans.

Whether measuring out of corners, slots or from edges, with this end-piece you are prepared for all measuring situations and the measurement reference is set automatically.

With the Leica DISTO S910 and Leica DISTO Transfer with CAD Plugin you can directly transfer the 3D measurements into AutoCAD or BricsCAD on site.

The P2P-function of the DISTO X3, X4 and S910 allows you to measure distances between any 2 points from one position. This is helpful when measuring inaccessible areas.

如有必要，可以更换Desto D810的锂离子电池。替换电池与所需的工具一起提供。

If necessary, the Li-Ion battery of the DISTO S910 can be replaced. The replacement battery is supplied together with the required tools.

点构孔允许在远处的物体上精确的瞄准，即使在明亮的阳光下也可以瞄准。如果无法再看到激光点，则在颜色显示器上清晰可见目标。

The battery compartment of the DISTO D2, X3, X4 and D510 is tightly closed to ensure that no dust or dirt can get in. However, it can be easily opened to change the batteries.

Disto X3和X4结合了创新的测量技术与防线设计。它们承受最多2米的滴剂，并受到灰尘和水喷射的保护。

P2P technology allows you to measure distances between any two points from one location. You can also determine any area by measuring the corner points.

With the DISTO D510, D810 or S910 it's easy to create a height profile. Based on a reference point, the following measurements will give you the height differences.

Start your digital construction process by exporting your plans as DXF or DWG files. Share and archive plans, attach photos as high-resolution JPGs, create PDF reports.

This tutorial explains the tool “Relocation” that allows to change the position of the 3D Disto in a measurement, if measurements cannot be done from one position.