Leica Smartpole
Easily work with GNSS and Total Station
Leica SmartPole为您提供了完全选择的自由,因为您可以轻松地在GNSS和Total Station模式之间切换,反之亦然。用GNSS或Total Station测量每个点,或者同时使用两者进行总站设置。SmartPole还允许您进行即时进行设置,从而使您完全灵活地提高生产率。
On-the-fly total station setup
With SmartPole, simply begin the survey and conduct setup on-the-fly whilst completing the survey. There is no need to measure orientation points first, saving you time in survey planning and execution
Flexibility
It is no longer needed to set up the total station first and then measure detail points. With SmartPole, the survey can begin right away. If a point can be measured with both GNSS and total station during the survey, you can use it as an on-the-fly orientation point for the setup. That way, the optimal geometric distribution of orientation points can be selected whilst simultaneously completing the survey.
没有限制
The location of orientation points often restricts where the total station can be placed. With SmartPole, the most convenient location can be chosen for the total station. Traversing is no longer required because each total station setup can be conducted independently with new coordinates and orientation being determined with SmartPole GNSS.
Leica Captivate field software
Captivate is an industry-revolutionising field software for various measurement instruments that turns complex data into the most realistic and workable 3D models. With easy-to-use familiar apps, all forms of measured and design data can be viewed and used. Leica Captivate spans industries and applications with little more than a simple swipe, regardless of whether you work with GNSS, total stations or both.
Leica Captivate 3D field software
Leica Nova MS60 self-learning multistation
Leica TS60 self-learning total station
Leica TS16 self-learning total station
Leica GS18 I GNSS smart antenna
Leica GS18 T GNSS smart antenna
Leica GS16 GNSS smart antenna
Leica GS07 GNSS智能天线
Leica Geosystems控制器